Login

KV-1SA

« Back to List« Go to the U.S.S.R. Tech Tree
KV-1SA
Starting in 1941, G. V. Barabash, a professor from the Academy of the WPRA Mechanization and Motorization Program, developed at least 5 variations of mechanized loading systems for Soviet combat vehicles. In July 1943, he proposed his most advanced option for shell loading, which could load 12–18 shells per minute and would be based on the KV-1S. The tank received an improved turret with two hatches on the side to load the shells and an improved rear recess that stored ammunition. Shells were also located in a mechanized rack at the bottom of the fighting compartment, under the gun. Since the mechanism was not fully automatic, a loader was still needed as part of the crew. Red Army GABTU representatives rejected the engineer's suggestions without even bothering to test the mechanism, and by early 1944, the mechanism for 76.2 mm guns was no longer relevant. After the war, G. V. Barabash managed to secure the copyright for several of his suggestions. Later, his ideas were likely considered by the design collectives that created loading mechanisms for Soviet tanks in the 1950–60s.

76 mm ZiS-5A

KV-1SA

10RKM

V-2K (r)

KV-1SA

Shell Types:

APCR
APCR
HE

Equipment:

Consumables:

Firepower:

Ammunition90 (rounds)
Caliber76 (mm)
Damage110 / 110 / 164 (HP)
Penetration120 / 150 / 38 (mm)
Rate of Fire18.52 (rounds/min)
Average Damage per Minute2037 (HP)
Shells in the Magazine5 
Time for Loading Between Shots2.30 (s)
Time for Complete Loading7.00 (s)
Gun Loading  (s)
Aiming Time2.50 (s)
Dispersion at 100 m0.45 (m)

Mobility:

Weight/Load Limit43.70 / 49.00 (t)
Engine Power500 (h.p.)
Specific Power11.44 (h.p./t)
Top Speed43 (km/h)
Reverse Speed14 (km/h)
Traverse Speed34 (deg/s)
Turret Traverse Speed26 (deg/s)

Survivability:

Hit Points800 (HP)
Hull Armor75 / 60 / 60 (mm)
Turret Armor82 / 82 / 82 (mm)

Spotting:

View Range320 (m)
Signal Range730 (m)
 

Crew:

Commander
Gunner
Driver
Radio Operator
Loader